Yamaha PSR-530 Owner's Manual - Page 109

,Q,Q,Q,Q,Q,Q,Q,Q,Q,Q,Q,Q,Q,Q About Digital Effects (Reverb/Chorus/DSP) s When DSP type Is Selected as a Insertion Effect • The three PSR-530 effects will be connected as shown below. • The signal will enter reverb and chorus according to the send level set for each, and the signal with the effect applied will be output according to the return level that is set. The reverb and chorus send levels are set for each part (track) with the Revoice mode.The reverb and chorus return level value is set in common for all the parts. • The stereo panning is available for each of the reverb and chorus at the output for their signals. Using MIDI, the panning position for the effect can be set (page 115). • If a "Send Chorus to Reverb" (page 115) signal is transmitted to the PSR-530 from an external MIDI device, a signal can be sent from the chorus to the reverb (connected in series). • The signal will enter DSP with the Dry/Wet (send level) that is set, and a signal with the effect applied will be output. The DSP Dry/Wet (send level) is set for only R1 voice with the Revoice mode. The DSP return level cannot be set. R1 Voice R2 Voice L Voice Variation is valid for only one part. variation part DSP Dry/Wet DSP DSP on/off volume expression PAN volume expression PAN volume expression PAN dry rev send cho send dry rev send cho send dry rev send cho send All tracks that can be revoiced. MIDI Channel 1 MIDI Channel 16 DSP variation on/off volume expression PAN dry rev send cho send The bold lines are stereo lines. REVERB reverb pan PAN reverb return send chorus to reverb CHORUS PAN chorus pan chorus return OUTPUT DRY LINE 107