Yamaha PSR-S975 PSR-S975/PSR-S775 Reference Manual - Page 123
MIDI Transmit Settings, CHORD SYS/EX., UPPER, LOWER
View all Yamaha PSR-S975 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
CHORD SYS/EX. The "Tx" setting turns MIDI transmission of MIDI chord exclusive data (chord detect. root and type) on or off. The "Rx" setting turns MIDI reception and recognition of MIDI chord exclusive data generated by external equipment on or off. MIDI Transmit Settings The explanations here apply to the TRANSMIT page in step 4 on page 120. This determines which parts will be sent as MIDI data and over which MIDI channel the data will be sent. 1 12 3 The dots corresponding to each channel (1-16) flash briefly whenever any data is transmitted on the channel(s). NOTE If "WLAN" is shown, this instrument can handle MIDI messages received via the USB wireless LAN adaptor connected to the [USB TO DEVICE] terminal. When "WLAN" is not shown although the USB wireless LAN adaptor is connected, turn the instrument off then on again. 1 Use the [A]/[B] buttons or [1 ]/[2 ] buttons to select the part for changing transmit settings. The Parts listed on this display are the same as those shown in the MIXING CONSOLE display and CHANNEL ON/OFF display with the exception of the two parts below. UPPER: A keyboard part played on the right side of the keyboard from the Split Point for the Voices (RIGHT 1 and/or 2). LOWER: A keyboard part played on the left side of the keyboard from the Split Point for the Voices. This is not affected by the on/off status of the [ACMP] button. 2 Use the [3 ] buttons to select a channel via which the selected part will be transmitted. NOTE If the same transmit channel is assigned to several different parts, the transmitted MIDI messages are merged to a single channel-resulting in unexpected sounds and possible glitches in the connected MIDI device. NOTE Protected Songs cannot be transmitted even if the proper Song channels 1-16 are set to be transmitted. 3 Use the [4 ]-[8 ] button to determine the types of data to be sent. For information on the MIDI messages which can be set here, see "Note Events" on page 73. 10 Connections PSR-S975/S775 Reference Manual 123