Yamaha RX-V3900BL Owner's Manual - Page 91
Music Content, Setup Speaker, Connect Bluetooth connection, Configuration Speaker configurations
UPC - 705105565903
View all Yamaha RX-V3900BL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
ADVANCED OPERATION Graphical user interface (GUI) menu 4 Press 9l to return to the previous menu level. Note If the connected Bluetooth receiver cannot find any Bluetooth components, "Not found" appears. ■ Connect (Bluetooth connection) Use this feature to establish a connection between the Yamaha Bluetooth wireless audio receiver (such as YBA10, sold separately) and your Bluetooth component. Note Pairing must be performed when using a Bluetooth component with the Bluetooth receiver connected to this unit for the first time of if the pairing data has been deleted. Press 9ENTER to establish a connection. The connected Bluetooth receiver starts searching Bluetooth components. Once the connection is established successfully, "BT Connected" appears. Note If the connected Bluetooth receiver cannot find any Bluetooth components, "Not found" appears. y To terminate the connection, press 9ENTER again. Music Content Use this feature to browse the music contents of iPod, USB component, PC/MusicCAST, Internet radio and Rhapsody® (U.S.A. model only). See the following pages for details. • iPod (page 66) • USB (page 68) • PC/MCX (page 68) • NET RADIO (page 68) • Rhapsody (page 68) Setup (Speaker) Use this feature to manually adjust the basic speaker settings. Most of the "Speaker" parameters are set automatically when you run the automatic setup. y • Set "Test Tone" to "On" to output the test tone for the "Configuration", "Distance" and "Level" settings. • If your subwoofer can adjust the output volume and the crossover frequency, set the volume to about half way (or slightly less) and set the crossover frequency to the maximum. ■ Configuration (Speaker configurations) Measure for the speaker size The woofer section of a speaker is - 16 cm (6.5 in) or larger: large - smaller than 16 cm (6.5 in): small Front (Front speakers) Choice Large Small Descriptions Select this setting when the front speakers are large. Select this setting when the front speakers are small. Note When "Bass Out" is set to "Front" (page 88), you can select only "Large" in "Front". If the value of "Front" is set to other than "Large" in advance, this unit change the value to "Large" automatically. Center (Center speaker) Choice Large Small None Descriptions Select this setting when the center speaker is large. Select this setting when the center speaker is small. Select this setting when you do not use the center speaker. The center channel signals are directed to the front left and right speakers. Surround (Surround left/right speakers) Choice Large Small None Descriptions Select this setting when the surround speakers are large. Select this setting when the surround speakers are small. Select this setting when you do not use the surround speakers. This unit is set to the Virtual CINEMA DSP mode (page 45), and "Surround Back" is automatically set to "None". English 87 En