Yamaha S03 Owner's Manual - Page 66
AC1FltCtl AC1 Filter Control, AC1 Amplitude Modulation Depth
View all Yamaha S03 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Multi Mode 19. AC1 CC No (AC1 Control Change Number) Determines the Control Change number for the AC1 (Assignable Controller 1) of each Part AC1 CC PAGE PART ELEM KEY 19 P OCTAVE No 1 00 ❏ Settings: 0~95 n The AC1 CC No parameter in the Voice mode is set in the Utility mode (PAGE 7). AC1 (Assignable Controller 1) The AC1 (Assignable Controller 1) is only available by using an external MIDI controller (such as a foot controller connected to a MIDI keyboard). By setting the AC1 Control Change number here to match the controller on the connected MIDI device, you can use that controller to change the sound, according to the settings made in the other AC1 parameters - such as AC1FltCtl, AC1 FMod/PMod, or the Variation Effect's AC1VarCtl. For example, by setting AC1 to "2" here, you can use a breath controller to control the Voice of a Part. If the connected MIDI controller is set to "0," the Part cannot be controlled, even by setting the proper Control Change number. For best results, also make sure that the sensitivity parameters (AC1FitCl, AC1 FMod/PMod, or the Variation Effect's AC1VarCtl) are set appropriately, as needed. 20. AC1FltCtl (AC1 Filter Control) Set the amount by which the filter cutoff frequency changes when the controller (Assignable Controller 1) is used. AC1FltCtl PAGE PART ELEM KEY 20 P OCTAVE +1 00 ❏ Settings: -64~+63 21-1. AC1 FMod (AC1 Filter Modulation Depth) 21-2. AC1 AMod (AC1 Amplitude Modulation Depth) These parameters let you set the depth of control the Control Change messages (via Assignable Controller 1) have over the filter and amplitude of the Part (Voice). AC1 FMod PAGE PART ELEM KEY 21 P OCTAVE 01 00 AC1 AMod PAGE PART ELEM KEY 21 P OCTAVE 01 00 ❏ Settings: 0~127 I AC1 FMod Set the amount by which the filter Cutoff frequency changes when Assignable Controller 1 is used. The larger the setting, the greater the depth of control. (The wah effect becomes deeper.) I AC1 AMod Set the depth of control that Assignable Controller 1 has over the amplitude modulation. A larger setting means a larger modulation depth. (The tremolo effect becomes deeper.) n Depending on the selected LFO wave type and the amplitude modulation depth setting, noise may result when the controller is moved. If this happens, reduce the modulation depth value. 22. ReverbSend Set the send level of the Reverb Effect. ReverbSend PAGE PART ELEM KEY 22 P OCTAVE 01 40 ❏ Settings: 0~127 n In the value is too high, noise may result. If this happens, reduce the value. 23. ChorusSend Set the send level of the Chorus Effect. ChorusSend PAGE PART ELEM KEY 23 P OCTAVE 01 00 ❏ Settings: 0~127 66 Part Controller/Part Effect