Yamaha S03 Owner's Manual - Page 68

Multi Mode 1. Init (Initialize) You can reset (initialize) all parameters of a Multi to their default settings. You can also selectively initialize certain parameters, such as Common settings, settings for each Part, and so on. Note that this does not return the Multi to its original state prior to editing. Instead, it is useful when building a completely new Multi from scratch. Init multi PAGE PART ELEM KEY 1 OCTAVE I Select Parameter Type to be Initialized Use the [DEC/NO] and [INC/YES] buttons to select the parameter to be initialized. When this is set to "Part," use the [+]/[-] buttons to select the desired Part (1 - 16). ❏ Settings: multi (Current Multi), cmmn (Current Common), part (Current Part 1 ~ 16) 2. CpyVar (Copy Variation Effect) When Var Connect is set to "SYS," this lets you copy the Effect settings for the Voice assigned to the Current Part. When Var Connect is set to "INS," this lets you copy the Variation Effect settings for the Voice assigned to the Part for which "Var Send" (PAGE 24 in Multi Part Edit) was set to "on." If all of the Parts' Var Send settings are "off," the Part having the Voice Effect settings to be copied can be selected, just as above (when Var Connect is set to "SYS"). Var Connect=SYS CpyVar PAGE PART ELEM KEY 2 P 1 OCTAVE Var Connect=INS CpyVar PAGE PART ELEM KEY 2 OCTAVE ❏ Settings: P1 ~ P16 (Part 1 ~ 16) (When Var Connect is set to "SYS," or when Var Connect is set to "INS" and all Parts' Var Send settings are "off.") No Parameter (When Var Connect is set to "INS" and one Part's Var Send settings is "on.") n The following parameters can be copied. • Variation Effect Type • Variation Parameters • MW Variation Control Depth • AC1 Variation Control Depth n When you copy the Variation effect data of a Drum Voice, the 2 Band EQ effect settings are copied. 3. CpyCtl (Copy Controller) This let you copy the Controller settings for the Voice assigned to the Part. CpyCtl PAGE PART ELEM KEY 3 P 1 OCTAVE ❏ Settings: 1 ~ 16, A (All Parts) n The following parameters can be copied. • MW Filter Control • MW Pitch Modulation Depth • MW Filter Modulation Depth • MW Amplitude Modulation Depth • Pitch Bend Range • AC1 Filter Control • AC1 Filter Modulation Depth • AC1 Amplitude Modulation Depth • Portamento Switch • Portamento Time 4. CpyPart (Copy Part) This lets you copy Part parameter settings of the Multi being edited to another Part in the same Part. Use the [DEC/NO] and [INC/YES] buttons to select the source Part. Use the [-] and [+] buttons to select the desired destination Part (1 - 16). CpyPart PAGE PART ELEM KEY 4 P OCTAVE P 102 desired destination source Part Part (1 - 16) ❏ Settings: P1 ~ P16 (Part 1 ~ 16) 5. BlkDmp (Bulk Dump) You can send all the parameter settings for the current Multi or all Multis to your computer or some other external MIDI device using Bulk Dump. BlkDmp Curnt PAGE PART ELEM KEY 5 OCTAVE ❏ Settings: Curnt (Current Multi), All (All Multis), Systm (All Utility and MIDI data) n To send Voice data, refer to the corresponding Bulk Dump function in the Voice Jobs (page 88). n In order to perform a Bulk Dump, the appropriate MIDI Device Number must be set. For details, see page 93. n For an application example showing how to use the Bulk Dump function, see page 42. 68