Yamaha SPX900 SPX900 Owners Manual Image - Page 10
Level, Fv0l1, Fv0l2, Balance, Level
View all Yamaha SPX900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
EXTERNAL CONTROL ASSIGNMENT The SPX900 allows two different parameters of a selected effect to be controlled by optional foot controllers (Yamaha FC7) connected to the front-panel EXT CTRL/FOOT VOL1 and 2 jacks. The EXT CTRL ASSIGN key is used to assign the desired effect parameters to the foot controllers used, and to set the required control range. External control assignments made for an effect program can' be stored in the user memory area (51 - 99) along with the effect (using the STORE function described above), so that the assignments made are recalled whenever that memory location is selected. 1. Select the desired effect program. 2. Select the parameter to be assigned to an external foot controller (PARAM, LEVEL, EQ or INT PARAM parameters can be assigned). SCROLL C==) ) A BACK PARAM LEVEL t:7D C=IZ) EXT CTRL EQ APAM ASSIGN ; "r REV1 HALL TRG. LEVEL= 0 3. Press the EXT CTRL ASSIGN key. The name of the selected effect program will remain on the upper line of the LCD, and one of the following parameters will appear on the lower line: C=7.7.7 C=.D SCROLL A BACK PARAM LEVEL C=D INT EXT CTRL EQ PARAM REV1 HALL FV0L1 REV TIME In the actual display, "XXXXXXXX" will be the name of the default parameter for the selected effect program. The EXT CTRL ASSIGN key can be used to scroll forward through the above parameters, and the SCROLL BACK key can be used to scroll backwards. 4. To assign the selected parameter to the EXT CTRL/FOOT VOL1 or EXT CTRL/FOOT VOL2 controller, use the EXT CTRL ASSIGN or SCROLL BACK key to call the "FVOL1 XXXXXXXX" or "FVOL2 XXXXXXXX" parameter. 1 SCROLL A BACK PARAM LEVEL ) EQ INT PARAM EXT CTRL AS, M REV1 HALL FV0L2 BALANCE - 6, 5. Press either the parameter or key and the parameter you called within the selected effect program will be assigned to the foot controller indicated on the display (FVOL1 or FVOL2). SCROLL A BACK PARAM LEVEL C:=7.D CZ= INT EXT CTRL EQ PARAM ASSIGN REV1 HALL FV0L2 TRG. LEVEL 6. Use the "MIN" and "MAX" parameters for the appropriate controller to set the control range. If the parameter to be controlled has a range of 0 to 100%, for example, setting the MIN parameter to 20 and the MAX parameter to 80 will allow the foot controller to vary the selected parameter from 20% to 80% of its total range. NOTE: Either or both controllers may be assigned. When both controllers are used, each can be assigned a different parameter within the selected effect program. NOTE. External control assignments will be lost if a different memory location is selected without first storing the assigned effect program into one of the user memory locations (51 - 99) using the STORE function. TE. MIDI control change messages received via the MIDI IN connector can also be used to control assigned parameters. See "MIDI CTRL ASSIGN" on page 29. CAUTION! When setting the range and storing it in the program, always make sure the preset values for the assigned parameters are included within the set range. When setting the range, confirm the values for MIN and MAX with the controller, and always make sure the preset values are inside the externally set values. If the preset values are outside the specified range, there may be no response to the controller when a recall operation is carried out. 8