Yamaha YHT-S401 Owners Manual - Page 14
BASIC OPERATION, Basic playback operation, Listening with headphones - iphone through remote
View all Yamaha YHT-S401 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
BASIC OPERATION Basic playback operation Once you have finished all cable connections and remote control operation, follow the procedure below to start basic playback operation. 3 Start playback on the selected external component. 1 For information on the external component, refer to the instruction manual for the product. 2 4 Press VOLUME +/- to adjust the volume level. Press SUBWOOFER +/- to adjust the subwoofer level. y • To turn off the volume temporarily, press MUTE. While the mute function is activated, the VOLUME indicator flashes. To resume the volume, press MUTE again or press VOLUME +/-. • When audio is output from both TV speaker and this unit, mute the TV sound. 4 • The subwoofer volume can be adjusted separately from the volume. • You can also adjust the subwoofer volume listening to test tone. (☞ P. 19) • Lowering the subwoofer volume is recommended at night. You can operate the unit by the TV's remote control when the HDMI control function is available. See the page 23 for details. 1 Press (Power). This unit is turned on and the STATUS indicator lights green. The input source and surround mode appear in the front panel display. y This unit has the auto-sleep function, which will automatically switch the unit to turn off if the unit is left turned on for 12 hours without any operation being performed. 2 Press one of the input buttons to select an input source. After the input source name has been displayed in the front panel display for three seconds, the front panel display returns to its normal display. (Input source name: surround/stereo mode). Note When sound of HDMI is output from the TV, the volume level does not change if you press VOLUME +/- or MUTE of the remote control. 5 Select surround mode or stereo mode and set your sound preferences. (☞ P. 11) Press (Power) again to set the unit to standby mode. When the HDMI control function is set to on or the battery of iPod/iPhone is charged, the STATUS indicator lights red. When the HDMI control function is set to off, the STATUS indicator turns off. (☞ P. 3) Listening with headphones Insert a headphone plug to the PHONES jack (☞ P. 3) of this unit. • The headphone volume, tone control can be set separately with speaker setting. • You can enjoy surround and stereo sound using a headphone same as the speaker. (☞ P. 11) 10 En