Yamaha YHT-S401 Owners Manual - Page 24

Setup menu Using other speakers Menu: 5:SP SETUP You can set the speaker type if you want to add or change speakers. When you connect only the supplied speaker, you do not have to change the setting. ■ Selecting the number of channels and the front speaker type Sub menu: 5-1:SP CHANNEL You can select the number of output speakers. Sub menu: 5-2:SP TYPE You can select the type of front speakers. "BAR": When you use the unit, either on its own or in addition to other commercially available speakers "BOOK SHELF": This setting is not used for this system "OTHER": When you connect commercially available speakers instead of the unit Supplied speaker: Commercially available speakers: 5-1:SP CHANNEL 5-2:SP TYPE 2CH 3CH (Default setting) 4CH 5CH BAR (Default setting) *3 BOOK SHELF *1 *1 *1, 3 *1, 3 OTHER *1, 2 *1, 2 *1, 2, 3 *1: "5-3:SP DISTANCE" setting available *2: "5-4:CROSSOVER" setting available *3: "8:MATRIX DECODE" settings available *1, 2, 3 ■ Setting the distance between the speakers Sub menu: 5-3:SP DISTANCE Select a parameter suited for the distance between the front left and right speakers, to obtain the most suitable surround effect. Available options (Default setting: NORMAL) "WIDE": When the distance between the front speakers is over 150 cm (59-1/16"). "NORMAL": When the distance between the front speakers is from 80 cm (31-1/2") to 150 cm (59-1/16"). "NARROW": When the distance between the front speakers is within 80 cm (31-1/2"). Notes • When the surround mode is off, this setting cannot be made. • This setting can be made only when "2CH" or "3CH" is selected in "5-1:SP CHANNEL". ■ Cutting the crossover register Sub menu: 5-4:CROSSOVER You can set the cutoff frequency output from the built-in subwoofer of this unit according to the specification of the connected speakers. Available options (Default setting: 150Hz) 80Hz, 100Hz, 120Hz, 150Hz, 200Hz 20 En