Yamaha YSP-1600 Owners Manual - Page 13
Raising the antenna, Unit installation position and surround sound effects - dimensions
View all Yamaha YSP-1600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
123456 ❑ Unit installation position and surround sound effects The unit achieves surround sound by reflecting sound beams off walls. Raising the antenna Raise the antenna on the rear panel of the unit when connecting a wireless router (access point) to use a network. Hold the base of the antenna while raising it to its upright position. Effective surround effect may not be achieved in the following environment. • Sound beams are blocked by obstacles such as furniture. • The room size is not within the following dimensions; Width: 3 meters to 7 meters (9.8 ft to 23 ft) Depth: 3 meters to 7 meters (9.8 ft to 23 ft) Height: 2 meters to 3.5 meters (6.6 ft to 11.5 ft) • Listening position is too close to the unit. • The unit is installed too close to the left or right wall. • The unit is installed in the corner of the room. • There is no wall for reflecting sound beam on the path of the sound beams. • The optimum surround sound effect is achieved by setting a position according to the installation position of the unit. For details, refer to "Setting a surround sound effect for the installation position" (p. 19). • Do not apply excessive force on the antenna. Doing so may damage it. • Be sure to check the direction in which the antenna moves, and angle it in the proper direction. • Do not remove the antenna. • For details on the wireless connection, refer to p. 32. PREPARATIONS ➤ a Installation En 13