Yamaha YSP-1600 Owners Manual - Page 15

123456 b Connecting a TV Connect a TV to the unit so that video input to the unit can be output to the TV. You can also enjoy playback of TV audio on the unit. • Use a 19-pin HDMI cable with the HDMI logo printed on it. A cable with a maximum length of 5 m is recommended to prevent degradation of signal quality. • For playback of 3D and 4K video content, use a high-speed HDMI cable. TVs that support Audio Return Channel (ARC) Connect the TV to the unit with an HDMI cable (not supplied). • This unit supports HDCP version 2.2, a copy protection technology. To enjoy playback of 4K video, connect the unit to the HDMI IN jack (one compatible with HDCP 2.2) on an HDCP 2.2-compliant TV. HDMI OUT (ARC) jack HDMI HDMI OUT(ARC) ARC-compatible HDMI input HDMI (ARC) HDMI HDMI IN OUT(ARC) NETWORK TV ANALOG SUBWOOFER OUT UPDATE ONLY The unit (rear) TV When connecting a TV that supports Audio Return Channel (ARC), enable the HDMI control function (p. 51). Audio Return Channel (ARC) ARC enables input and output of audio signals via a single HDMI cable. If the TV supports ARC, audio signals from the TV can be input to this unit via the same HDMI cable used to output video signals from this unit to the TV. • Use an ARC-compatible HDMI cable. TVs that do not support Audio Return Channel (ARC) Connect the TV to the unit with an HDMI cable (not supplied) and an optical cable. HDMI OUT (ARC) jack HDMI HDMI OUT(ARC) HDMI input HDMI HDMI HDMI IN OUT(ARC) NETWORK TV ANALOG SUBWOOFER OUT UPDATE ONLY The unit (rear) O TV TV jack 1. Remove the cap OPTICAL O TV Audio output (digital optical) 2. Check the direction of the plug • If the TV has no optical jack Use a 3.5 mm stereo mini plug cable to connect the unit to the TV via the ANALOG input jack on the unit and the audio output jack on the TV. TV audio can be played through this unit by switching input to ANALOG using the ANALOG key on the remote control. PREPARATIONS ➤ b Connecting a TV En 15