Yamaha YV-1600A Owner's Manual - Page 21

BEFORE PLAYING : YV-3910/3710/3700/2700/2700G/1600A/520 s Power Supply Prepare the supplied AC adapter. * Make sure to use the supplied AC adapter. Use of different adapters may cause damage not covered by the warranty. z Connect the small plug of the AC adapter to the DC 12V IN jack on the controller. x Plug the AC adapter into a power outlet. Controller AC Adapter MOTOR OUT DC 12V IN DC 12V IN AC * Wrapping the AC adapter cord once around one of the legs will prevent accidental disconnection of the adapter plug. s PAUSE MEMORY FUNCTION SETTING (YV-3910/3710/3700 only) The YV-3910, YV-3710 and YV-3700 are equipped with a PAUSE MEMORY FUNCTION which stops the fan always in exactly the same position when it is turned off (no vibrato applied). After connection to an AC outlet, set the PAUSE MEMORY to the desired fan stop position as follows: z Turn the controller power ON. x Press the START/STOP button once to start the fan, and then press the START/STOP button once again to stop the fan. c Remove the synchro belt by sliding it off the fan side pulley, as shown in the illustration. Position the fan vertically (fan position with strongest resonator effect) and remount the belt. Perform this setting for both the natural and the accidental tone side. Slide belt off. Fan Side Pulley Synchro Belt Set the fan to a vertical position. Fan Resonator 19