Zanussi ZCI66080BA User Manual - Page 25

Atroubleshooting

Get Zanussi ZCI66080BA PDF manuals and user guides View all Zanussi ZCI66080BA manuals
Add to My Manuals
Save this manual to your list of manuals

Page 25 highlights

1 2 1 3. Pull the door trim to the front to remove it. 4. Remove the glass panels. To install the panels, do the same steps in reverse. REMOVING AND CLEANING THE DOOR GLASSES - MAIN OVEN The door glass in your product can be different in type and shape from the example you see in the image. The number of glasses can also be different. 1. Push the door trim at one side to remove it. 2. Pull up the trim. 3. Remove the glass panels. To replace the glass panels, do the same steps in reverse. Before you lower the trim, attach the A trim part to the door. Refer to the image. REPLACING THE LAMP WARNING! Risk of electric shock. The lamp can be hot. 1. Turn off the oven. Wait until the oven is cold. 2. Disconnect the oven from the mains. 3. Put a cloth on the bottom of the cavity. The back lamp The lamp glass cover is at the back of the cavity. 1. Turn the lamp glass cover counterclockwise to remove it. 2. Clean the glass cover. 3. Replace the oven lamp with a suitable 300 °C heat-resistant oven lamp. Use the same oven lamp type. 4. Install the glass cover. A 2 1 TROUBLESHOOTING WARNING! Refer to Safety chapters. 25

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
1
2
1
3.
Pull the door trim to the front to remove it.
4.
Remove the glass panels.
To install the panels, do the same steps in reverse.
REMOVING AND CLEANING THE DOOR
GLASSES - MAIN OVEN
The door glass in your product can be
different in type and shape from the
example you see in the image. The
number of glasses can also be
different.
1.
Push the door trim at one side to remove it.
1
2
A
2.
Pull up the trim.
3.
Remove the glass panels.
To replace the glass panels, do the
same steps in reverse. Before you
lower the trim, attach the A trim part to
the door. Refer to the image.
REPLACING THE LAMP
WARNING!
Risk of electric shock.
The lamp can be hot.
1.
Turn off the oven. Wait until the oven is cold.
2.
Disconnect the oven from the mains.
3.
Put a cloth on the bottom of the cavity.
The back lamp
The lamp glass cover is at the back of
the cavity.
1.
Turn the lamp glass cover counterclockwise to
remove it.
2.
Clean the glass cover.
3.
Replace the oven lamp with a suitable 300 °C
heat-resistant oven lamp.
Use the same oven lamp type.
4.
Install the glass cover.
TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
25