Zanussi ZHC9244X User Manual - Page 61
Cleaning the hood
View all Zanussi ZHC9244X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Warning Changing the light bulb(s) • Failure to observe the instructions on cleaning the unit and changing the filters will cause a fire hazard. You are therefore strongly recommended to follow these instructions. • The manufacturer declines all responsibility for any damage to the motor or any fire damage linked to inappropriate maintenance or failure to observe the above safety recommendations. • Disconnect the cooker hood from the mains supply. • Prior to touching the light bulbs ensure they are cooled down. • Extract the lamp cover by using a small flat screwdriver or similar tool as a lever. • Replace the old bulb with a new one of the same type. • Refit the lamp cover. • If the light does not come on, make sure the bulb has been inserted in correctly before contacting your local Service Force Centre. Cleaning the hood • Clean the outside of the hood using a damp cloth and a solution of water and mild washing up liquid. • Never use corrosive, abrasive or flammable cleaning products or products containing bleach. • Never insert pointed objects in the motor's protective grid. • Only ever clean the switch panel and filter grill using a damp cloth and mild washing up liquid. • Clean all the plastic parts with a soft cloth soaked in warm water and neutral soap. • It is extremely important to clean the unit and change the filters at the recommended intervals. Failure to do so will cause grease deposits to build up that could constitute a fire hazard. 61