Zanussi ZHC9244X User Manual - Page 66
If you want to use
View all Zanussi ZHC9244X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
• Fix the flues support bracket to the wall with 2 screws. • Connect a tube (tube and bands for fixing not supplied, to be purchased) for discharging the fumes to the connection ring placed over the aspiration motor unit. The other end of the tube should be connected to a device for expelling fumes on the outside of the hood in the aspiration version. G Ø 8 Ø 5x45 • Hang the hood to the 2 upper screws. • Introduce and screw the screws (and washers) up into the holes for the definitive fixing (COMPULSORY!!). Then, having checked the setting of the hood, TIGHTEN ALL THE upper and lower SCREWS. If you want to use the filtering version, fix deflector to flues support bracket and connect the other end of the tube to the connection ring placed on deflector. Note: the lower fixing points are visible removing the grease filters and they are at the sides of the hood 66