ZyXEL NBG4115 User Guide - Page 66
Push Button Configuration (PBC), Start, Push Button, Network, Wireless Client, WPS Station
View all ZyXEL NBG4115 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Chapter 6 Tutorials 6.4.1 Push Button Configuration (PBC) 1 Make sure that your NBG4115 is turned on and that it is within range of your computer. 2 Make sure that you have installed the wireless client (this example uses the NWD210N) driver and utility in your notebook. 3 In the wireless client utility, find the WPS settings. Enable WPS and press the WPS button (Start or WPS button) 4 Log into NBG4115's Web Configurator and press the Push Button button in the Network > Wireless Client > WPS Station screen. Note: Your NBG4115 has a WPS button located on its panel, as well as a WPS button in its configuration utility. Both buttons have exactly the same function; you can use one or the other. Note: It doesn't matter which button is pressed first. You must press the second button within two minutes of pressing the first one. The NBG4115 sends the proper configuration settings to the wireless client. This may take up to two minutes. Then the wireless client is able to communicate with the NBG4115 securely. 66 NBG4115 User's Guide