ZyXEL NSA320 User Guide - Page 32
NAS Discovery Screen - network
View all ZyXEL NSA320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Chapter 3 NAS Starter Utility for NSA210 3.3 NAS Discovery Screen Use this screen to view the NSAs in your network. The NSA's Server Name. The default is 'nsa' followed by the number of your model ('nsa210' for example). See Section 3.9 on page 45 for how to change it to a more recognizable one in your network. Start the NAS Starter Utility (click the icon in your Desktop or in Start > Programs > ZyXEL > NAS Starter Utility). The first time you open the NAS Starter Utility the discovery screen appears as follows. Figure 16 NAS Discovery The following table describes the labels in this screen. Table 5 NAS Discovery LABEL DESCRIPTION Refresh Hostname Click this to refresh the screen. The NAS Starter Utility does not automatically refresh. This is the server name you configured for the NSA. If you have more than one NSA in your network, it is recommended that you give each one a unique name for identification purposes. If you have several NSAs connected to your computer/network, hover your mouse over the host name to view the details of each device. A box pops up containing details about the NSA. Hostname shows the NSA's configured server name. IP shows the NSA's current IP address. Model ID shows the NSA's model name. Firmware Version shows the version of firmware the NSA is currently using. Status shows whether the NSA is Online, Unreachable, Configuring, or Config Failed. 32 Media Server User's Guide