ZyXEL NSA320 User Guide - Page 45
Con Network Setting - default login
View all ZyXEL NSA320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Chapter 3 NAS Starter Utility for NSA210 Enter the administrator user name and password and click Login. Figure 45 Login See Section 4.5 on page 62 for more on the administration screens. 3.9 Configure Network Setting Use these screens to change the NSA network settings such as the NSA's name, IP address, subnet mask, default gateway, DNS, or PPPoE. Click Configure network setting in the main utility screen to display the following screen. Figure 46 NAS Starter Utility > Configure network setting The following table describes the labels in this screen. Table 8 NAS Starter Utility > Configure network setting LABEL DESCRIPTION NAS Name Specify a name to uniquely identify the NSA on your network. You can enter up to 15 alphanumeric characters with minus signs allowed but not as the last character. The name must begin with an alphabetic character (a-z) and is case sensitive. Get IP automatically from DHCP server Select this if the NSA is automatically assigned an IP address from the ISP or a DHCP server in your network. Assign IP Manually Select this if you want to assign the NSA a fixed IP address, subnet mask and default gateway. Note: Do not configure an IP address that is already in use in your network. This results to a network IP address conflict and makes the NSA inaccessible. Media Server User's Guide 45