ZyXEL Omni 288S User Guide - Page 105
Extended AT* Command Set
View all ZyXEL Omni 288S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
Chapter 11 - AT Command Set Summaries Extended AT* Command Set Command *Cn *Dn *En *Fn *Gn *Hn *HS *In *Mn *Pn *Qn *Rab Options *C0 * *C1 *C2 *C3 n=0-49 *D0 * *E0 * *E1 *F0 *F1 *G0 *G1 *G2 *G3 *G4 *G5 n=0-39 *I0 *I1 *I2 *M0 *M1 n=0-15 *P9 * *Q0 *Q1 *Q2 * *Q3 Function & Description Ref. Character length, including start, stop and parity bit. S15.3-4 10-bit character length. 11-bit character length. 9-bit character length. 8-bit character length. Set default dial pointer at telephone directory location n. S29 (See also S35.4 and S38.0) Modem error control negotiation. S21.0 if error control negotiation fails, keep the non-error control connection. If error control negotiation fails, disconnect the call (hang-up). Remote configuration enable S36.0 Deny remote configuration Accept remote configuration (Remote Digital Loop-back must be granted, &T4) Security function selection S36.5-7 Disable security function Enable type 1 security, with password check (ZyXEL to ZyXEL only) Enable type 1 security, with password check and call back (ZyXEL to ZyXEL only) Enable type 2 security, with password check Enable type 2 security, with password check and call back Enable type 2 security, with password check and call back, remote user enters the call back number Modify user password table at location n. Modify supervisory password (Default: "ZyXEL") Command set selection S17.6-7 AT command set V.25bis command set Dumb mode Leased line auto-handshake mode selection S14.0 Set to Originate mode Set to Answer mode Set leased line transmission power level; ranges from 0 S17.1-4 dBm to -15 dBm (default: -9 dBm) (see also S35.3) Action taken when line quality changes. S27.6-7 No action to poor signal quality. Retrain action taken if signal quality is poor. (See also S41.2) Adaptive rate, automatic fall-back or forward. Disconnect if signal quality is poor. Read remote profile "b" to local user profile "a" S36.1 11-7