ZyXEL Omni 288S User Guide - Page 29
Quick Tips when issuing AT Commands
View all ZyXEL Omni 288S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Chapter 3 - Basic Modem Operation Quick Tips when issuing AT Commands The ENTER or RETURN key must be pressed to execute a command. Multiple AT commands can be combined into one line. For example, AT&D2 and AT&N0 can be combined into one line AT&D3&N0. The Omni 288S processes commands from left to right. The AT command that appears to the right might over-write the command to the left if they are trying to accomplish tasks or set modes that cannot coexist. If you see duplicated characters for each one you type, your Omni 288S and software both have their "echo" feature turned. The Omni 288S command echo state is switched off using ATE0 and on using ATE1 (default). To eliminate the double characters, turn off the software's command echo rather than using the ATE0 command. If you see no characters in your terminal window when you type, the modem's echo setting is probably set to off. In this case, issue the ATE1 command. When a command is successfully issued and accepted, a modem responds with what is called a "Result Code." The Omni 288S supports both "verbose" result codes (i.e. "OK"), and "numerical" result codes (i.e. "0"). You can use the ATV command to set it one way or the other as follows. Command ATV0 ATV1 Description Select numerical result code Select verbose result code There are a few basic commands that do not require the "AT" command prefix. These are as follows. Command A/ A> +++ Description Repeats the last issued AT command once Repeats the last issued AT command once, or re-dials the last dialed number up to 9 times until a key is pressed or a connection is made. Terminates the current connection attempt, if pressed while modem is handshaking. Escape code sequence. Entered while the modem is in Data Mode. Returns modem to Command Mode. The Omni 288S supports several groups of AT commands: AT Command Set/Type Basic AT (Hayes compatible) Basic AT$ (on line help) Extended AT& commands Extended AT* commands Example ATB0 AT$ AT&N0 AT*I1 3-4