ZyXEL P-334U Quick Start Guide - Page 4

Hardware Installation - default password

Get ZyXEL P-334U PDF manuals and user guides View all ZyXEL P-334U manuals
Add to My Manuals
Save this manual to your list of manuals

Page 4 highlights

P334 ENGLISH 2 Hardware Installation 2.1 Rear Panel LABEL DESCRIPTION LAN 10/100M Use an Ethernet cable to connect at least one computer for initial Prestige configuration. These ports are auto-negotiating (can connect at 10 or 100Mbps) and auto-sensing (automatically adjust to the type of Ethernet cable you use (straight-through or crossover)). WAN 10/100M Connect your cable/DSL modem to this port with the cable that came with your modem. POWER 12 VDC Connect the end of the included power adaptor (use only this adapter) to this power socket. After you've made the connections, connect the power cable to a power supply and look at the front panel LEDs. RESET You only need to use this button if you've forgotten the Prestige's password. It returns the Prestige to the factory defaults (password is 1234, LAN IP address 192.168.1.1. See your User's Guide for details). 2.2 Front Panel LEDs The PWR LED blinks while performing system testing and then stays on if the testing is successful. The LAN, and WAN LEDs turn on if they are properly connected. LED PWR STATUS Amber COLOR Off On DESCRIPTION The Prestige is not receiving power. Power to the Prestige is too low 3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
P334 ENGLISH
3
2 Hardware Installation
2.1 Rear Panel
LABEL
DESCRIPTION
LAN 10/100M
Use an Ethernet cable to connect at least one computer for initial Prestige configuration. These
ports are auto-negotiating (can connect at 10 or 100Mbps) and auto-sensing (automatically
adjust to the type of Ethernet cable you use (straight-through or crossover)).
WAN 10/100M
Connect your cable/DSL modem to this port with the cable that came with your modem.
POWER
12
V
D
C
Connect the end of the included power adaptor (use only this adapter) to this power socket.
After you’ve made the connections, connect the power cable to a power supply and look at the front panel LEDs.
RESET
You only need to use this button if you’ve forgotten the Prestige’s password. It returns the
Prestige to the factory defaults (password is 1234, LAN IP address 192.168.1.1. See your
User’s
Guide
for details).
2.2 Front Panel LEDs
The
PWR
LED blinks while performing system testing and then stays on if the testing is successful.
The
LAN
, and
WAN
LEDs turn on if they are properly connected.
LED
STATUS
COLOR
DESCRIPTION
Off
The Prestige is not receiving power.
PWR
Amber
On
Power to the Prestige is too low