ZyXEL PLA-470 User Guide - Page 68
PLA-470/PLA470 v2, LEDs and Troubleshooting, PLA-4xx Series User's Guide
View all ZyXEL PLA-470 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Chapter 7 LEDs and Troubleshooting Table 13 PLA-400 v2/402 v2 Lights (continued) LIGHTS ICON COLOR STATUS DESCRIPTION HomePlug Green On The PLA-400 v2/402 v2 detects another powerline adapter. The data transfer rate is greater than 40 Mbps. Amber The PLA-400 v2/402 v2 detects another powerline adapter. The data transfer rate is between 10~40 Mbps. Red The PLA-400 v2/402 v2 detects another powerline adapter. The data transfer rate is between 0~10 Mbps. Green/ Amber/ Red Blinking The PLA-400 v2/402 v2 is communicating with another powerline adapter. Data is being transmitted and/or received. Blinking at the same time as the POWER light indicates an unsuccessful connection if you have used the ENCRYPT button. Off The HomePlug port does not detect another powerline adapter. ETHERNET Green On The ETHERNET port is on and ready and the PLA-400 v2/402 v2 detects a device connected to it. Blinking The PLA-400 v2/402 v2 is communicating with a networking device connected to it. Off The PLA-400 v2/402 v2 does not detect any devices connected to its ETHERNET port. 7.1.3 PLA-470/PLA470 v2 The following figure is the front panel of the PLA-470 and PLA-470 v2. Use the lights to determine if the PLA-470 or PLA470 v2 is behaving normally or if there are some problems on your powerline network. Figure 48 PLA-470 and PLA-470 v2 Lights 68 PLA-4xx Series User's Guide