ZyXEL SBG3300-N000 User Guide - Page 157
Table 25, Label, Description
View all ZyXEL SBG3300-N000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 157 highlights
Chapter 7 Wireless The following table describes the fields in this screen. Table 25 More AP: Edit LABEL DESCRIPTION Wireless Network Setup Wireless You can Enable or Disable the wireless LAN in this field. Passphrase Type If you set security for the wireless LAN and have the Device generate a password, the setting in this field determines how the Device generates the password. Select None to set the Device's password generation to not be based on a passphrase. Select Fixed to use a 16 character passphrase for generating a password. Passphrase Key Select Variable to use a 16 to 63 character passphrase for generating a password. For a fixed type passphrase enter 16 alphanumeric characters (0-9, A-Z, with no spaces). It must contain both letters and numbers and is case-sensitive. For a variable type passphrase enter 16 to 63 alphanumeric characters (0-9, A-Z, with no spaces). It must contain both letters and numbers and is case-sensitive. Wireless Network Settings Wireless Network Name (SSID) The SSID (Service Set IDentity) identifies the service set with which a wireless device is associated. Wireless devices associating to the access point (AP) must have the same SSID. Enter a descriptive name (up to 32 English keyboard characters) for the wireless LAN. Hide SSID Select this check box to hide the SSID in the outgoing beacon frame so a station cannot obtain the SSID through scanning using a site survey tool. Client Isolation Select this to keep the wireless clients in this SSID from communicating with each other. MBSSID/LAN Isolation Select this to keep the wireless clients in this SSID from communicating with clients in other SSIDs or LAN devices. Enhanced Multicast Forwarding Select this check box to allow the Device to convert wireless multicast traffic into wireless unicast traffic. BSSID This shows the MAC address of the wireless interface on the Device when wireless LAN is enabled. Maximum Bandwidth Specify the maximum rate for wireless traffic in kilobits per second (Kbps). Security Level Security Mode Select Basic (WEP) or More Secure (WPA(2)-PSK, WPA(2)) to add security on this wireless network. The wireless clients which want to associate to this network must have same wireless security settings as the Device. After you select to use a security, additional options appears in this screen. Or you can select No Security to allow any client to associate this network without any data encryption or authentication. Apply Cancel See Section 7.2.1 on page 151 for more details about this field. Click Apply to save your changes. Click Cancel to exit this screen without saving. SBG3300-N Series User's Guide 157