ZyXEL WAP6804 User Guide - Page 30
Status, DESCRIPTION, LABEL, Status Screen Icon Key AP Mode
View all ZyXEL WAP6804 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Chapter 5 Access Point Mode Table 4 Status Screen Icon Key (AP Mode) (continued) ICON DESCRIPTION Click this icon to see the Status page. The information in this screen depends on the device mode you select. Click this icon to see the Monitor navigation menu. Click this icon to see the Configuration navigation menu. Click this icon to see the Maintenance navigation menu. The following table describes the labels shown in the Status screen. Table 5 Status Screen (AP Mode) LABEL DESCRIPTION Device Information Device Name This is the WAP6804's model name. Software Version Device Mode This is the firmware version and the date created. This is the device mode (Section 3.1.2 on page 22) to which the WAP6804 is set - Access Point Mode. Current Partition This shows which partition the WAP6804 uses. The WAP6804 has two partitions and supports dual image function. LAN Information Eth0 MAC Address This shows the MAC Address of the WAP6804's first Ethernet LAN port. Eth1 MAC Address IP Address This shows the MAC Address of the WAP6804's second Ethernet LAN port. This shows the LAN port's IP address. IP Subnet Mask This shows the LAN port's subnet mask. Gateway IP This shows the LAN port's gateway IP address. IPv6 Address This shows the LAN port's IPv6 address. IPv6 Link Local Address IPv6 Gateway This shows the LAN port's current IPv6 link-local address. This shows the LAN port's gateway IPv6 address. Wireless Network Information - 5 GHz/2.4 GHz MAC Address This shows the MAC address of the WAP6804's wireless interface. Wireless Network This shows if the wireless network is enabled or disabled. Name (SSID) Link Rate (Mbps) This shows a descriptive name used to identify the WAP6804 in the wireless LAN. This shows the rate at which data is transferred across the wireless network. Current Channel This shows the channel number which you select manually or the WAP6804 automatically scans and selects. Authentication This shows the data encryption method the WAP6804 uses for the wireless connection. Mode This shows the wireless standard the WAP6804 uses. WPS Status This displays Configured when the WPS has been set up. This displays Unconfigured if the WPS has not been set up. System Status System Up Time This is the total time the WAP6804 has been on. Current Date/Time This field displays your WAP6804's present date and time. WAP6804 User's Guide 30