ZyXEL WRE6505 User Guide - Page 31
Completing the Connection Wizard, ENCRYPTION, KEY FORMAT, KEY LENGTH - review
View all ZyXEL WRE6505 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Chapter 6 Connection Wizard Table 8 Network > Wireless LAN > AP Select (continued) LABEL DESCRIPTION Exit Click this to exit the wizard. Previous Click this to see the previous page of APs. Next Click this to see the next page of APs. Note: The wireless stations and WRE6505 must use the same SSID, channel ID, WPA-PSK (if WPA-PSK is enabled) or WPA2-PSK (if WPA2-PSK is enabled) for wireless communication. 2 Click Next to continue. 3 Type the selected network's wireless password (key). The number of characters accepted by the KEY field is shown in the following table. Figure 15 Wizard Step 3: Enter Wireless Network Password The following table describes the labels in this screen. Table 9 Maximum Key Lengths ENCRYPTION 64-bit WEP 128-bit WEP WPA pre-shared key KEY FORMAT ASCII Hex ASCII Hex Passphrase Hex KEY LENGTH 5 characters 10 characters 13 characters 26 characters 8-63 characters 64 characters 4 Click Next to continue and verify the password. 6.2.2.2 Completing the Connection Wizard Complete the installation process by reviewing the wireless network settings and applying the configuration. After entering the wireless network's password, the verification screen displays as follows. WRE6505 User's Guide 31