ZyXEL WRE6505 User Guide - Page 77
WRE6505 Access and Login
View all ZyXEL WRE6505 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Chapter 12 Troubleshooting 12.2 WRE6505 Access and Login I don't know the IP address of my WRE6505. 1 Click Start > Run, enter cmd, and then enter Ping zyxelsetup. 2 The default IP address is 192.168.1.2. Note: In Repeater mode, you can access the login screen by using the IP address (192.168.1.2) or by typing "http://zyxelsetup" in your browser IP address bar. While in AP mode, connect the WRE6505 to your router (configured under same subnet) and type "http://zyxelsetup" in your browser IP address bar. 3 If you changed the IP address and have forgotten it, you might get the IP address of the WRE6505 by looking up the IP address of the default gateway for your computer. To do this in most Windows computers, click Start > Run, enter cmd, and then enter ipconfig. The IP address of the Default Gateway might be the IP address of the WRE6505 (it depends on the network), so enter this IP address in your Internet browser. Login (see the Quick Start Guide for instructions) and go to the Device Information table in the Status screen. Your WRE6505's IP address is available in the Device Information table. • If the DHCP setting under LAN information is None, your device has a fixed IP address. • If the DHCP setting under LAN information is Client, then your device receives an IP address from a DHCP server on the network. 4 If your WRE6505 is a DHCP client, you can find your IP address from the DHCP server. This information is only available from the DHCP server which allocates IP addresses on your network. Find this information directly from the DHCP server or contact your system administrator for more information. 5 Reset your WRE6505 to change all settings back to their default. This means your current settings are lost. See Section 12.4 on page 80 in the Troubleshooting for information on resetting your WRE6505. I forgot the username and password. 1 The default username is admin and default password is 1234. 2 If this does not work, you have to reset the device to its factory defaults. See Section 11.6.3 on page 70. I cannot see or access the Login screen in the Web Configurator. 1 Make sure you are using the correct IP address. WRE6505 User's Guide 77