1997 Chevrolet Blazer Owner's Manual - Page 291

Front Turn Signal Lamps If you have fog lamps. the fog lamp bracket must be removed before you can replace the front turn signal lamps. 2. Turn the socket counterclockwise and pull it out. 3. Holding the base of the bulb, pull the bulb straight out of the socket. 4. Push the new bulb into the socket until it clicks. 5. Put the socket back into the turn signal lamp assembly and turn it clockwise until it locks into place. Front Sidemarker Lamps L 1 1. Remove the lens retaining screws. -. Remove the sidemarker lens from the radiator grille. ? U 3. Turn the bulb and socket one-quarter turn counterclockwise. 3. Remove the bulb and socket from the lens. 5 . Install the new bulb and socket to the sidemarker lens. I . Reach under the bumper and behind the turn s i p a l lamp assembly. 6. Rotate the bulb and socket one-quarter of a turn clockwise. 7 . Install the sidemarker lens to the radiator grille. 8. Insert the tabs into the locators. 9. Install and tighten the screws. 6-36