1997 Chevrolet Blazer Owner's Manual - Page 96

'krn and Lane ChangeSignals The turn signal has two upward (for right) and two downward (for left) positions.These positions allow you to signal a turn or a lane change. If a bulb is burned out, replace it to help avoid an accident. If the arrows don't go on at all when you signal a turn, check fuse (see "Fuses and Circuit the Breakers'' in the Index) and for burned-out bulbs. If you have a trailer towing option with added wiring for the trailer lamps, a different turn signal flasher is used. With this flasher installed, the signal indicator will flash even if a turn signal bulb is burned out. Check the front and rear turn signal lamps regularly to make sure they are working. To signal a turn, move the lever all the way up or down. the When the turn is finished, lever will return automatically. An arrow on the instrument panel will flash in the direction of the turn or lane change. Headlamp Highkow Beam Changer To change the headlamps from low-beam to high or high to low, pull the multifunction lever all the way toward you. Then release it. To signal a lane change. just raise or lower the lever until the ;lrrocv starts to tlash. Hold it there until you complete your 1mc change. The lever will return by itself when you rclt.ast: i t . As you signal ;1 turn or LI lane change, if the arrows don't flash but just stay 011. ;I signal bulb may be burned out and other drivers w o n ' t see your turn signal. 1 When the high beams are on,.this indicator light on the instrument panel will also be on. 2-39