2004 Chevrolet Corvette Owner's Manual - Page 122

Headlamp High/Low-Beam Changer To change the headlamps from low beam to high or high to low, push the turn signal lever all the way forward. While the high beams are on, this light on the instrument panel cluster also will be on. To change the headlamps from high to low, pull the lever rearward. Windshield Wipers Headlamps on Reminder If you turn the ignition off and leave the headlamps or parking lamps on and open a door, you will hear a chime reminding you to turn off the lamps. Use this lever located on the right side of the steering column to operate the windshield wipers. OFF: Move the lever to OFF to turn off the windshield wipers. INT (Intermittent): Move the lever to INT to choose a delayed wiping cycle. Turn the INT ADJ band down for a longer delay or up for a shorter delay. The further the INT ADJ band is turned upward, the shorter the delay will be and the further the INT ADJ band is turned downward, the longer the delay will be. Flash-to-Pass To use the flash-to-pass feature, momentarily pull the turn signal lever toward you. The high-beam indicator will flash to indicate to the other driver that you intend to pass. If the low-beam headlamps are off and you have the optional fog lamps on, the fog lamps will flash. 3-8