2004 Chevrolet Corvette Owner's Manual - Page 264

How to Add Fluid Here's how to add fluid. Refer to the Maintenance Schedule to determine what kind of fluid to use. See Recommended Fluids and Lubricants on page 6-11. 1. Remove the filler plug. 2. Add fluid at the filler plug hole. Add only enough fluid to bring the fluid level up to the bottom of the filler plug hole. 3. Install the filler plug. Be sure the plug is fully seated. 4. Tighten the plug to 20 lb ft (27 Y). When to Check and What to Use Hydraulic Clutch The hydraulic clutch linkage in your vehicle is self-adjusting. The master cylinder reservoir is filled with hydraulic fluid. It is not necessary to regularly check the fluid unless you suspect there is a leak in the system. Adding fluid won't correct a leak. A fluid loss in this system could indicate a problem. Have the system inspected and repaired. The clutch master cylinder reservoir is located at the rear of the engine compartment on the driver's side. See Engine Compartment Overview on page 5-12 for more information on location. Refer to the Maintenance Schedule to determine how often you should check the fluid level in your master cylinder reservoir and for the proper fluid. See Owner Checks and Services on page 6-8 and Recommended Fluids and Lubricants on page 6-11. 5-22