2004 Chevrolet Corvette Owner's Manual - Page 294

Back-Up Lamps You can access the back-up lamps through the inboard taillamp opening. See Taillamps and Turn Signal Lamps on page 5-50. 1. Squeeze the tab on the socket while turning it counterclockwise to remove it from the assembly. 2. Remove the bulb from the socket. 3. Reverse the steps listed previously with a new bulb. Windshield Wiper Blade Replacement Windshield wiper blades should be inspected each time maintenance is performed. See "Wiper Blade Check" under Scheduled Maintenance on page 6-4 for more information. Replacement blades come in different types and are removed in different ways. For the proper type and length, see Normal Maintenance Replacement Parts on page 6-13. It is a good idea to clean or replace the wiper blade assembly every six months. Notice: Allowing the wiper blade arm to touch the windshield when no wiper blade is installed could damage the windshield. Any damage that occurs would not be covered by your warranty. Do not allow the wiper blade arm to touch the windshield. Replacement Bulbs Exterior Lamp High-Beam Headlamp Low-Beam Headlamp Back-Up Rear Stop/Tail and Turn Signal Bulb Number 9005 9006 2057 3057 For any bulb replacements or procedures not listed here, please consult your dealer. 5-52