2009 Chevrolet Corvette Owner's Manual - Page 335

4. Pull the bulb straight out to remove it from the socket. 5. Push the new bulb in the bulb socket until it snaps into place. 6. Reinstall the lamp assembly by first lining up the tabs on the bottom of the lamp assembly with the tabs in the vehicle, then slide it in. 7. Replace the screw at the top of the lamp assembly. Windshield Replacement The windshield is part of the Head-Up Display (HUD) system. If you ever have to get the windshield replaced, get one that is designed for HUD or the HUD image may look out of focus. Windshield Wiper Blade Replacement Windshield wiper blades should be inspected for wear and cracking. See Scheduled Maintenance on page 6-4 for more information. Replacement blades come in different types and are removed in different ways. For the proper type and length, see Maintenance Replacement Parts on page 6-14. It is a good idea to clean or replace the wiper blade assembly every six months. Allowing the wiper blade arm to touch the windshield when no wiper blade is installed could damage the windshield. Any damage that occurs would not be covered by the vehicle's warranty. Do not allow the wiper blade arm to touch the windshield. Replacement Bulbs Exterior Lamp Front Parking/Turn Signal/Daytime Running Lamp (DRL) Headlamp, High-Beam Lamp Sidemarker Lamp Stoplamp/Taillamp/Turn Signal Lamp Bulb Number 5702KA H9 W3W 3057KX For replacement bulbs not listed here, contact your dealer/retailer. 5-59