2009 Chevrolet Corvette Owner's Manual - Page 45

If the child restraint has the LATCH system, see Lower Anchors and Tethers for Children (LATCH) (Coupe and Convertible Models Only) on page 1-35 or Lower Anchors and Tethers for Children (LATCH) (Z06 and ZR1 Models Only) on page 1-36 for how and where to install the child restraint using LATCH. If a child restraint is secured using a safety belt and it uses a top tether, see Lower Anchors and Tethers for Children (LATCH) (Coupe and Convertible Models Only) on page 1-35 or Lower Anchors and Tethers for Children (LATCH) (Z06 and ZR1 Models Only) on page 1-36 for top tether anchor locations. Do not secure a child seat in a position without a top tether anchor if a national or local law requires that the top tether be anchored, or if the instructions that come with the child restraint say that the top strap must be anchored. In Canada, the law requires that forward-facing child restraints have a top tether, and that the tether be attached. You will be using the lap-shoulder belt to secure the child restraint in this position. Follow the instructions that came with the child restraint. 1. Move the seat as far back as it will go before securing the forward-facing child restraint. When the passenger sensing system has turned off the right front passenger frontal airbag and seat-mounted side impact airbag (if equipped), the off indicator on the passenger airbag status indicator should light and stay lit when you start the vehicle. See Passenger Airbag Status Indicator on page 3-37. 2. Put the child restraint on the seat. 3. Pick up the latch plate, and run the lap and shoulder portions of the vehicle's safety belt through or around the restraint. The child restraint instructions will show you how. 1-41