2009 Chevrolet Corvette Owner's Manual - Page 336

To remove the wiper blade assembly: 1. Open the hood to gain access to the windshield wipers. 2. Lift the wiper arm away from the windshield. 4. Remove the insert from the blade assembly (A). The insert has two notches at one end that are locked by the bottom claws of the blade assembly. At the notch end, pull the insert from the blade assembly. To install the new wiper insert: A. Blade Assembly D. Blade Pivot B. Arm Assembly E. Hook Slot C. Locking Tab F. Arm Hook 3. Press down on the blade assembly pivot locking tab (C). Pull down on the blade assembly (A) to release it from the wiper arm hook (F). 5-60 1. Slide the insert (D), notched end last, into the end with the two blade claws (A). Slide the insert all the way through the blade claws at the opposite end (B). The plastic caps (C) will be forced off as the insert is fully installed.