2011 Chevrolet Camaro Owner's Manual - Page 312

10-38 Vehicle Care High Intensity Discharge (HID) Lighting { WARNING The low beam high intensity discharge lighting system operates at a very high voltage. If you try to service any of the system components, you could be seriously injured. Have your dealer or a qualified technician service them. After an HID headlamp bulb has been replaced, the beam might be a slightly different shade than it was originally. This is normal. Headlamps, Front Turn Signal and Parking Lamps (Base Vehicle) The base model vehicle has a halogen headlamp and a turn signal/parking lamp on the headlamp assembly. To replace one of these bulbs: 1. Open the hood. See Hood on page 10‑5. A. Parking/Turn Signal Lamp B. Halogen Headlamp 3. Disconnect the wiring harness and turn the bulb socket counterclockwise to remove it from the headlamp assembly. 4. Pull the bulb straight out from the socket. 5. Push the new bulb into the socket and reinstall the socket into the headlamp assembly by turning it clockwise. 2. Press in on the tabs located on the sides of the duct and then push the duct rearward into the air cleaner/filter housing.