2011 Chevrolet Camaro Owner's Manual - Page 361

Vehicle Care 10-87 { WARNING Rust or dirt on a wheel, or on the parts to which it is fastened, can make wheel nuts become loose after time. The wheel could come off and cause an accident. When changing a wheel, remove any rust or dirt from places where the wheel attaches to the vehicle. In an emergency, a cloth or a paper towel can be used; however, use a scraper or wire brush later to remove all rust or dirt. { WARNING Never use oil or grease on bolts or nuts because the nuts might come loose. The vehicle's wheel could fall off, causing a crash. 12. Reinstall the wheel nuts with the rounded end of the nuts toward the wheel. Tighten each nut as much as possible using the wheel wrench until the wheel is held firmly against the hub. Use your free hand to prevent the wheel from turning while you are tightening. 13. Lower the vehicle by turning the jack handle counterclockwise. Lower the jack completely. 10. Remove any rust or dirt from the wheel bolts, mounting surfaces, and spare wheel. 11. Place the compact spare tire on the wheel-mounting surface.