2011 Chevrolet Camaro Owner's Manual - Page 39

Keys, Doors and Windows Arming the System To arm the system, press RKE transmitter. 2-11 Q on the How the System Alarm is Activated To activate the system if it is armed, open any door, the trunk, or hood. The horn will sound and the hazard warning flashers will flash. How to Detect a Tamper Condition If the horn sounds and the turn signal lamps flash three times when K is pressed, an attempted break-in has occurred while the system was armed. The vehicle may also display a message on the DIC. See Anti-Theft Alarm System Messages on page 5‑40 for more information. The alarm automatically arms after about 30 seconds. The security light, located on the instrument panel, flashes. Disarming the System To disarm the system, do one of the following: . . How to Turn Off the System Alarm To turn off the system alarm, do one of the following: . . Press K on the RKE transmitter. Press K on the RKE transmitter. Turn the ignition to ON/RUN. Turn the ignition to ON/RUN. Immobilizer See Radio Frequency Statement on page 13‑19 for information regarding Part 15 of the Federal Communications Commission (FCC) rules and Industry Canada Standards RSS-210/220/310. The security light stays on for approximately one second when the vehicle is disarming. If the system is armed when there are people inside of the vehicle, pulling the door handle from the inside one time will unlock the door. Pulling the handle a second time will unlatch the door. The theft-deterrent system is disarmed when the alarm is turned off.