2011 Chevrolet Camaro Owner's Manual - Page 315

Vehicle Care 10-41 Taillamps, Turn Signal, and Stoplamps To replace a taillamp, turn signal, or stoplamp bulb: 1. Open the trunk. See Trunk on page 2‑9. 5. Push the new bulb straight into the bulb socket until it clicks. 6. Turn the bulb socket clockwise to reinstall. 3. Turn the bulb socket counterclockwise and pull the bulb straight out of the lamp socket. 4. Install the new bulb. 5. Push the bulb straight into the socket and turn clockwise to reinstall. 6. Reinstall the license plate lamp by lifting it through the fascia opening until the clip is in place. License Plate Lamp To replace one of these bulbs: 2. Remove the close out panel retainers to gain access to the bulb socket connectors. 3. Turn the bulb socket counterclockwise to remove it. 4. Pull the old bulb straight out of the bulb socket. 1. Unclip the license plate lamp from the fascia opening. 2. Pull the license plate lamp down through the fascia opening.