2014 Dodge Durango Owner Manual - Page 409

STARTING AND OPERATING 407 NOTE: If the ignition switch is left in the ACC or RUN • Press the ENGINE START/STOP button a second time to place the ignition to the RUN position (EVIC will (engine not running) position and the transmission is in display "ON/RUN"), PARK, the system will automatically time out after 30 minutes of inactivity and the ignition will switch to the • Press the ENGINE START/STOP button a third time to OFF position. return the ignition to the OFF position (EVIC will display "OFF"). ENGINE START/STOP Button Functions - With Driver's Foot OFF The Brake Pedal (In PARK Or Extreme Cold Weather (Below -20°F Or −29°C) NEUTRAL Position) To ensure reliable starting at these temperatures, use of The ENGINE START/STOP button operates similar to an an externally powered electric engine block heater (availignition switch. It has four positions, OFF, ACC, RUN able from your authorized dealer) is recommended. and START. To change the ignition positions without starting the vehicle and use the accessories follow these steps: • Starting with the ignition in the OFF position, • Press the ENGINE START/STOP button once to place the ignition to the ACC position (EVIC will display "ACC"), 5