2014 Dodge Durango Owner Manual - Page 430

428 STARTING AND OPERATING NOTE: 2. Press and hold the brake pedal. • If Steps 1 or 2 of either the Preferred or Alternate 3. Shift the transmission into NEUTRAL. Procedure are not satisfied prior to attempting the shift 4. Using a ballpoint pen or similar object, press and hold or if they no longer are being met while the shift the recessed transfer case NEUTRAL (N) button (located attempt is in process, the desired position indicator by the selector switch) for four seconds. The light next to light will flash continuously while the original position the N symbol will blink, indicating shift in progress. The indicator light is ON, until all requirements have been light will stop blinking (stay on solid) when the shift to met. NEUTRAL (N) is complete. A "4WD System in Neutral" message will display on the EVIC (Electronic Vehicle • The ignition switch must be in the RUN position for a Information Center). Refer to "Electronic Vehicle Inforshift to take place and for the position indicator lights mation Center (EVIC)" in "Understanding Your Instruto be operable. If the ignition switch is not in the RUN ment Panel" for further information. position, then the shift will not take place and no position indicator lights will be on or flashing. NEUTRAL Shift Procedure 1. Bring the vehicle to a complete stop with the engine running.