2015 Dodge Durango User Guide - Page 24

GETTING STARTED Vehicles With Center Arm Rest Tether For rearward facing infant seats secured in the center seat position with the vehicle seat belts, the rear center seat position has an armrest tether that secures the arm rest in the upward position. 1. To access the center seat arm rest tether, first lower the arm rest. The tether is located behind the armrest and hooked onto the plastic seat backing. 2. Pull down on the tether to unhook it from the plastic seat backing. Center Seat Position Arm Rest Tether 3. Raise the armrest and attach the tether hook to the strap located on the front of the arm rest. Center Seat Arm Rest Raised Displaying The Tether Installing The Child Restraint Using The LATCH Lower Anchors NOTE: Never "share" a LATCH anchorage with two or more child restraints. 1. Loosen the adjusters on the lower straps and on the tether strap of the child seat so that you can more easily attach the hooks or connectors to the vehicle anchorages. 2. Attach the lower hooks or connectors of the child restraint to the lower anchorages in the selected seating position. 3. If the child restraint has a tether strap, connect it to the top tether anchorage. See below for directions to attach a tether anchor. 4. Tighten all of the straps as you push the child restraint rearward and downward into the seat. Remove slack in the straps according to the child restraint manufacturer's instructions. 5. Test that the child restraint is installed tightly by pulling back and forth on the child seat at the belt path. It should not move more than 1 inch (25.4 mm) in any direction. 22