2015 Dodge Durango User Guide - Page 60

O P E R AT I N G Y O U R V E H I C L E BLIND SPOT MONITORING The Blind Spot Monitoring (BSM) system uses two radar-based sensors, located inside the rear bumper fascia, to detect Highway licensable vehicles (automobiles, trucks, motorcycles etc.) that enter the blind spot zones from the rear/front/side of the vehicle. The Blind Spot Monitoring (BSM) system warning light, located in the outside mirrors, will illuminate if a vehicle moves into a blind spot zone. The BSM system can also be configured to sound an audible (chime) alert and mute the radio to notify you of objects that have entered the detection zones. Refer to your Owner's Manual on the DVD for further details. POWER SUNROOF The power sunroof switch is located on the overhead console. Opening Sunroof Express Open Press the switch rearward and release it within one-half second. The sunroof will fully open and stop automatically. Manual Open Press and hold the switch rearward to open the sunroof. Any release of the switch will stop the movement, and the sunroof will remain in a partially open position until the switch is pressed again. Venting Sunroof Press and release the button and the sunroof will open to the vent position. This is called "Express Vent" and will occur regardless of sunroof position. During Express Vent operation, any movement of the switch will stop the sunroof. Power Sunroof Switch 1 - Opening Sunroof 2 - Venting Sunroof 3 - Closing Sunroof 58