2015 Dodge Durango User Guide - Page 43

O P E R AT I N G Y O U R V E H I C L E ELECTRONIC SPEED CONTROL The Electronic Speed Control switches are located on the right side of the steering wheel. Cruise ON/OFF • Push the ON/OFF button to activate the Electronic Speed Control. CRUISE CONTROL READY will appear in the Driver Information Display (DID) to indicate the Electronic Speed Control is on. • Push the ON/OFF button time to turn the system off. a second CRUISE CONTROL OFF will appear in the Driver Information Display (DID) to indicate the Electronic Speed Control is off. SET • With the Electronic Speed Control on, push and release the SET+ or SET- button to set a desired speed. Electronic Speed Control Switches Once a speed has been set a message CRUISE CONTROL SET TO MPH/KM will appear indicating what speed was set. An indicator CRUISE will also appear and stay on in the Driver Information Display (DID) when the speed is set. 1 - Push Cancel 2 - Push Set+/Accel 3 - Push Resume 4 - Push On/Off 5 - Push Set-/Decel Accel/Decel To Increase Speed • When the Electronic Speed Control is set, you can increase speed by pushing the SET + button. The drivers preferred units can be selected through the instrument panel settings if equipped. Refer to "Understanding Your Instrument Panel" in the Owner's Manual on the DVD for more information. The speed increment shown is dependant on the speed of U.S. (mph) or Metric (km/h) units: U.S. Speed (mph) • Pressing the SET + button once will result in a 1 mph increase in set speed. Each subsequent tap of the button results in an increase of 1 mph. • If the button is continually pressed, the set speed will continue to increase until the button is released, then the new set speed will be established. 41