1997 Ford Explorer Owner Guide 1st Printing - Page 186

Maintenance and care until the level is at the correct area on the dipstick. If an overfill occurs, excess fluid should be removed by a qualified technician. Checking and adding manual transmission fluid (if equipped) 1. Clean the filler plug. 2. Remove the filler plug and inspect the fluid level. • The fluid level should be at the bottom of the opening. 3. Add enough fluid through the filler opening so that the fluid level is at the bottom of the opening. Use only fluid that meets Ford specifications. Refer to the Capacities and specifications chapter for more information on manual transmission fluid. Driveline universal joint and slip yoke The universal joints standard with your vehicle do not require lubrication. If the original equipment universal joints are replaced with universal joints equipped with grease fittings, lubrication will be necessary at the intervals shown in the Service Guide supplement. Constant velocity or double carden joint (if equipped) This component may be fitted with a flush-type grease fitting that requires an adaptor to permit proper lubrication. If replaced, 187