2002 Ford Windstar Owner Guide 2nd Printing - Page 136

Seating and Safety Restraints 2. (For 2nd row bench seat only.) Using the clip attached to the end of the shoulder belt(s), clip the end of the belt to the stationary portion of the shoulder belt coming out of the trim panel. The end of the shoulder belt must be clipped in order to keep it from striking anything during vehicle operation. If your bench seat is equipped with the forward fold down seatback, position the seatback in the full down position to make removing the seat easier. 3. From behind the seat, pull straight back on the release controls located on each side of the seat, releasing the rear floor latches. 4. Lift up the back of the seat by the release controls to clear the floor latches and then pull the seat rearward until the front hooks have come out of the floor tubs. 5. Remove the seat. 136