2002 Ford Windstar Owner Guide 2nd Printing - Page 76
2002 Ford Windstar Manual
Page 76 highlights
Lights Replacing front parking/turn signal bulbs Note size and location of retainer pins for installation. 1. At the back of the headlamp, pull two retainer pins up to release the headlamp assembly. 2. Pull headlamp assembly forward disengaging the lamp from the rear retainer to expose the back of the bulb. 3. Remove bulb socket by turning it counterclockwise, then slide it out of the lamp assembly. 4. Carefully pull bulb straight out of the socket and push in the new bulb. 5. To complete installation, follow removal procedure in the reverse order. Replacing tail lamp/backup/turn lamp bulbs 1. Open the liftgate to expose the tail lamp assemblies. 2. Remove the two screws from the lamp assembly. 3. Carefully remove the lamp assembly by pulling it rearward about 45 degrees. 4. Rotate bulb socket counterclockwise and remove from lamp assembly. 5. Pull bulb straight out of socket and push in new bulb. 6. To complete installation, follow the removal procedure in the reverse order. 76