2005 Ford Escape Owner Guide 3rd Printing (Spanish) - Page 605

Maintenance and Specifications Service refill capacity is determined by filling the transmission to the bottom of the filler hole with the vehicle on a level surface. 3 Indicates only approximate dry-fill capacity. Some applications may vary based on cooler size and if equipped with an in-tank cooler. The amount of transmission fluid and fluid level should be set by the indication on the dipstick's normal operating range. 4 5 6 2 Add the coolant type originally equipped in your vehicle. Fill to 1/4 inch to 9/16 inch (6 mm to 14 mm) below bottom of fill hole. Use of synthetic or synthetic blend motor oil is not mandatory. Engine oil need only meet the requirements of Ford specification WSS-M2C930-A and the API Certification mark. LUBRICANT SPECIFICATIONS Item Ford Part Name or equivalent Multi-Purpose Grease Ford Part Number XG-4 or XL-5 Ford Specification ESB-M1C93-B or ESR-M1C159-A Body hinges, latches, door striker plates and rollers, seat tracks, fuel filler door hinge and spring, primary and auxiliary hood latches Hydraulic clutch Motorcraft High fluid and brake Performance fluid DOT 3 Motor Vehicle Brake Fluid Halfshaft CV Motorcraft joints Constant Velocity Joint Grease PM-1 ESA-M6C25-A and DOT 3 XG-5 WSS-M1C258-A1 279 2005 Escape (204) Owners Guide (post-2002-fmt) USA_English (fus)