2011 Ford F150 Regular Cab Owner Guide 3rd Printing - Page 110

Driver Controls Press and hold the rear of the control to adjust the pedals toward you. Press and hold the front of the control to adjust the pedals away from you. WARNING: Never adjust the accelerator and brake pedal with feet on the pedals while the vehicle is moving. POWER DEPLOYABLE RUNNING BOARDS (IF EQUIPPED) Deployable running boards (DRB) automatically move when the doors are opened to assist entering and exiting the vehicle. Automatic power deploy: • The running boards will extend down and out when the doors are opened. Automatic power stow: • The running boards will return to the stowed position when the doors are closed. There will be a two second delay before the running boards move in to the stowed position. Manual power deploy: To manually operate the running boards, refer to Message center in the Instrument Cluster chapter. • This feature can manually set the running boards in the deployed (OUT) position for access to the roof. • When running boards are manually set in the deployed position, the boards will return to the stowed position and enter automatic mode when the vehicle speed exceeds 5 mph (8 km/h). Enable/disable: To enable/disable the power running board feature, refer to Message center in the Instrument Cluster chapter. • When this feature is disabled (OFF), the running boards will move to the stowed position regardless of the position of the doors. • When this feature is enabled (AUTO), the running boards will move back to the correct positions based off of the door positions. 110 2011 F-150 (f12) Owners Guide, 3rd Printing USA (fus)