2011 Ford F150 Regular Cab Owner Guide 3rd Printing - Page 309
2011 Ford F150 Regular Cab Manual
Page 309 highlights
Driving Press and on the steering wheel controls to select a zoom option. You can choose from OFF, Level 1, Level 2 and Level 3. Use the OK button to make a selection. When activating manual zoom mode, the system will always start from OFF. The manual zoom feature is not available on vehicles equipped a rearview mirror display and a standard instrument cluster. When manual zoom is enabled, only the centerline will be shown. Rear camera delay If equipped with rearview mirror display and optional instrument cluster: After shifting out of R (Reverse) and into any gear, the image will remain until vehicle speed reaches 5 mph (8 km/h). This will only occur if the rear camera delay feature is ON. The default setting for the rear camera delay is ON. To turn this feature on or off, select the following from the message center in the instrument cluster: 1. Settings 2. Driver Assist 3. Rear View Camera 4. Camera Delay The camera delay options are ON and OFF. If the vehicle is equipped with a rearview mirror display and the standard instrument cluster, the camera delay will always remain on. There is no option to turn the camera delay off. If equipped with the touchscreen display: After shifting out of R (Reverse) and into any gear other than P (Park), the image will remain until the vehicle speed reaches five mph (8 km/h). This will only occur if the rear camera delay feature is on, or until any radio button is selected. The default setting for the rear camera delay is ON. Use the Settings function on the touchscreen display to set the rear camera delay on or off. Refer to the navigation supplement for more information. When towing, the rearview camera system will only see what is being towed behind the vehicle. This might not provide adequate coverage it usually provides in normal operation and some objects might not be seen. 309 2011 F-150 (f12) Owners Guide, 3rd Printing USA (fus)