2011 Ford F150 Regular Cab Owner Guide 3rd Printing - Page 193

Seating and Safety Restraints Read Steps 1 - 4 thoroughly before proceeding with the deactivation/activation programming procedure. Note: If you are using MyKey௡, the Belt-Minder௡ cannot be disabled. Also, if the Belt-Minder௡ has been previously disabled, it will be re-enabled after the use of MyKey௡. Refer to MyKey௡ in the Locks and security chapter. The driver and front passenger Belt-Minder௡ features can be deactivated/activated by performing the following procedure: Before following the procedure, make sure that: • The parking brake is set • The gearshift is in P (Park) • The ignition switch is in the off position • The driver and front passenger safety belts are unbuckled WARNING: While the design allows you to deactivate your Belt-Minder௡, this system is designed to improve your chances of being safely belted and surviving an accident. We recommend you leave the Belt-Minder௡ system activated for yourself and others who may use the vehicle. To reduce the risk of injury, do not deactivate/activate the Belt-Minder௡ feature while driving the vehicle. 1. Turn the ignition switch to the on position. DO NOT START THE ENGINE. 2. Wait until the safety belt warning light turns off. (Approximately one minute) • Step 3 must be completed within 30 seconds after the safety belt warning light turns off. 3. For the seating position being disabled, buckle then unbuckle the safety belt three times, ending in the unbuckled state. • After Step 3, the restraint system warning light (airbag light) will be turned on for three seconds. 4. Within approximately seven seconds of the light turning off, buckle then unbuckle the safety belt. • This will disable the Belt-Minder௡ feature for that seating position if it is currently enabled. As confirmation, the restraint system warning light will flash four times per second for three seconds. 193 2011 F-150 (f12) Owners Guide, 3rd Printing USA (fus)