2014 Ford F250 Super Duty Super Cab Diesel Supplement Printing 1 - Page 63

2014 Ford F250 Super Duty Super Cab Manual

Page 63 highlights

Scheduled Maintenance Tightening lug nuts Vehicles with single rear wheels Tighten the lug nuts to the specified torque at 500 miles (800 km) after any wheel disturbance (such as tire rotation, changing a flat tire or wheel removal). Tighten the wheel lug nuts to the specified torque at 100 miles (160 km), and again at 500 miles (800 km) of new vehicle operation and after any wheel disturbance (such as tire rotation, changing a flat tire or wheel removal). Vehicles with dual rear wheels Note: For the proper lug nut torque specification, see Technical specifications in the Wheels and Tires chapter of your owner's manual. Multi-point Inspection In order to keep your vehicle running right, it is important to have the systems on your vehicle checked regularly. This can help identify potential issues and prevent major problems. We recommend having the following multi-point inspection performed at every scheduled maintenance interval to help make sure your vehicle keeps running great. Multi-point inspection Accessory drive belt(s) Battery performance Engine air filter Exhaust system Horn operation Radiator, cooler, heater and A/C hoses Suspension component for leaks or damage Steering and linkage Exterior lamps and hazard warning system Tires (including spare) for wear and proper ** operation pressure Fluid levels ; fill if necessary For oil and fluid leaks * * Windshield for cracks, chips or pits Washer spray and wiper operation Brake, coolant recovery reservoir, automatic transmission, power steering and window washer. ** If your vehicle is equipped with a temporary mobility kit, check the tire sealant expiration Use By date on the canister. Replace as needed. 60 Super Duty (TFA)

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82

Tightening lug nuts
Tighten the lug nuts to the specified torque at 500 miles
(800 km) after any wheel disturbance (such as tire rota-
tion, changing a flat tire or wheel removal).
Vehicles with single rear
wheels
Tighten the wheel lug nuts to the specified torque at 100
miles (160 km), and again at 500 miles (800 km) of new
vehicle operation and after any wheel disturbance (such
as tire rotation, changing a flat tire or wheel removal).
Vehicles with dual rear
wheels
Note:
For the proper lug nut torque specification, see Technical specifications in the Wheels
and Tires chapter of your owner's manual.
Multi-point Inspection
In order to keep your vehicle running right,
it is important to have the systems on your
vehicle checked regularly. This can help
identify potential issues and prevent major
problems. We recommend having the
following multi-point inspection performed
at every scheduled maintenance interval
to help make sure your vehicle keeps
running great.
Multi-point inspection
Horn operation
Accessory drive belt(s)
Radiator, cooler, heater and A/C hoses
Battery performance
Suspension component for leaks or
damage
Engine air filter
Steering and linkage
Exhaust system
Tires (including spare) for wear and proper
pressure
**
Exterior lamps and hazard warning system
operation
Windshield for cracks, chips or pits
Fluid levels
*
; fill if necessary
Washer spray and wiper operation
For oil and fluid leaks
*
Brake, coolant recovery reservoir, automatic transmission, power steering and window
washer.
**
If your vehicle is equipped with a temporary mobility kit, check the tire sealant expiration
Use By date on the canister. Replace as needed.
60
Super Duty (TFA)
Scheduled Maintenance